Epson PowerLite S5 3LCD Projector 2000 ANSI HD HDMI withAdapter 1080i Remote

Epson-PowerLite-S5-3LCD-Projector-2000-ANSI-HD-HDMI-withAdapter-1080i-Remote-01-zm Epson PowerLite S5 3LCD Projector 2000 ANSI HD HDMI withAdapter 1080i Remote
Epson PowerLite S5 3LCD Projector 2000 ANSI HD HDMI withAdapter 1080i Remote
Epson PowerLite S5 3LCD Projector 2000 ANSI HD HDMI withAdapter 1080i Remote
Epson PowerLite S5 3LCD Projector 2000 ANSI HD HDMI withAdapter 1080i Remote
Epson PowerLite S5 3LCD Projector 2000 ANSI HD HDMI withAdapter 1080i Remote
Epson PowerLite S5 3LCD Projector 2000 ANSI HD HDMI withAdapter 1080i Remote
Epson PowerLite S5 3LCD Projector 2000 ANSI HD HDMI withAdapter 1080i Remote
Epson PowerLite S5 3LCD Projector 2000 ANSI HD HDMI withAdapter 1080i Remote

Epson PowerLite S5 3LCD Projector 2000 ANSI HD HDMI withAdapter 1080i Remote
Epson PowerLite S5 3LCD Projector. Digital Multimedia Projector Brightness: 2000 lumens Contrast: 400:1 Native Resolution: 800×600 HD Video Mode: 1080i Display Type: 3LCD Projector Weight: 5.8 lb. Projector is Professionally Tested and is in Good Working Order. Lamp and filter are cleaned to improve image quality and extend projector life. Genuine Lamp has been used for few hours. Over 50% lamp life remaining. Good, some scratches, little dust. FREE & Convenient Accessories Included by TeKswamp. No other cables or accessories are included. A power cable is NOT included in international orders. The operation of any electronics using foreign adapters may cause the equipment to malfunction and/or become a fire hazard. 2 Included is a high quality remote custom programmed to specifically work with your model of projector. Equipment may have some cosmetic marks, scratches and/or blemishes in areas other than what is shown. For over 10 years running, we specialize in refurbishing electronics. We acknowledge it is mission critical to maintain the highest standards by offering ALL of the following to our customers. Square and honest pricing. FREE accessories (all of the necessary items to properly operate your projector right out of the box). Quality testing and refurbishing all projectors correctly using industry experienced technicians. TeKswamp thoroughly tests, cleans and replaces any damaged or worn parts, guaranteeing a properly functioning projector with a beautiful picture every single time! You don’t have to read any information below. The following information should be viewed as constructive advice based on years of experience. Projector Image Quality, Image Brightness, Thoroughness of Inspections, Proper Representation. There are many factors that may affect image quality, brightness and overall value of a projector, most of which goes unnoticed by the untrained eye. Dust & Optic Burns – Image Quality. Optic burns may discolor the image or create discolored spots. These spots can be created from long hours of use, inappropriate temperature, or dust. Most used projectors are dusty. Dust overall creates darker image projection and can leave spots on the projection by getting attached to the optic inside. It may be nearly impossible to remove the dust from the optic without completely disassembling the projector. Also, dust can attach itself to heat sensitive areas thus overheating the projector and causing a malfunction. TeKswamp technicians check the projection image quality and thoroughly clean the inside and outside of projectors to eliminate as much dust as possible. Lamps – Image Brightness. Important Education about Projector Lamps: Many non-authentic non-OEM lamps can die within 6 to 12 months whether the projector is being used or not, generic lamps may produce a darker or brighter image than an OEM lamp. Non-authentic lamps die quickly because of inferior build quality whereby the gas sealed within the lamp leaks. Also, the brighter lamp may burn the projector`s optic because it could run on a higher temperature than the projector can withstand. Sometimes, older uncared for lamps with high-end hours are left in the projector, resulting in a shorter life for your lamp. TeKswamp ALWAYS insures you will receive a lamp with low hours. In addition, TeKswamp inspects every lamp to check for burns, dust and clarity of the lamp reflector. Projector Inspections and Testing. Used projectors MUST be thoroughly inspected and tested for optimal functionality and endurance. For example, some used projectors can overheat and simply just turn off to prevent over-heating over time. Also, it is hard to notice smaller malfunctions until it is too late like malfunctioning legs/buttons/ lamp hours, etc. Example: If a leg does not function properly, it could create a major hassle if you need to constantly set up, jimmy and move your projector around. TeKswamp inspects EVERY aspect of the projectors we sell. Why do we go thru so much hassle? We Take Pride in Our Work and in Our Ability to Offer the Very Best High Tech Reconditioned Products Available! Education with Regard to Projector Specifications: It is important to familiarize yourself with projector specifications. You can identify for yourself whether a particular projector best suits your type of needs. With TeKswamp, you always get exactly what you pay for and then some! __________________________________________________ How to Properly Choose the Right Type of Projector to Best Suit Your Specific Needs. OCCASIONAL USAGE [Really Tight Budget, Bright Picture Required]. Examples: Family reunions, Parties, Ceremonies. Most appropriate if you want to make a good impression on a smaller budget. WEEKLY USAGE [School/college, Church]. Examples: For teachers, consider a “Short Throw LCD Projector”. This way the teacher will not be blinded by the light if he/she looks at the projector. (Search “short throw projector” for more information). LCD projector 2000+ (recommended in a darker room) or 2500+ ANSI lumens. Important Note: DLP projectors are not recommended in this case scenario. They are less reliable and they create a rainbow effect for images that are in motion. (Search: “DLP projector rainbow effect” for more information). COMMERCIAL USAGE (Powerpoints, Short Video Presentations). LCD for presentations which are more subtle like PowerPoint presentations. Richer color, more reliable in transportation, but bigger Optional: Use DLP for video presentation or if the weight is a consideration; 3-4lb vs 6-7lb. WEEKLY USAGE (Home Theater, Games). High contrast LCD (preferably) 2000:1 or more 3D DLP 3000+ lumens for 3D movies Native Wide Resolution or at least 1024×768 2500+ lumens HDMI input. OCCASIONAL USAGE (Home Theater, Games). DLP 2500+ lumens with HDMI adapter. No DLP projectors recommended. The heat/cold and humidity might burn the optic in the unit (some models) even within a few hours. The item “Epson PowerLite S5 3LCD Projector 2000 ANSI HD HDMI withAdapter 1080i Remote” is in sale since Monday, April 4, 2016. This item is in the category “Consumer Electronics\TV, Video & Home Audio\TV & Video\Home Theater Projectors”. The seller is “tekswamp_projectors” and is located in Sarasota, Florida. This item can be shipped worldwide.
  • Video Inputs: HDMI
  • Throw Ratio: 1.48:1 – 2.00:1
  • Resolution: 800×600
  • Connections: HDMI
  • Brand: Epson
  • Model: PowerLite S5
  • Image Aspect Ratio: 4:3
  • Features: Ceiling Projection
  • Contrast Ratio: 400:1
  • Audio Outputs: Speaker(s)
  • Image Brightness: 2000 ANSI Lumens
  • Display Technology: LCD
  • Native Resolution: 800×600
  • MPN: V11H252020

Epson PowerLite S5 3LCD Projector 2000 ANSI HD HDMI withAdapter 1080i Remote