6,000hr Lamp Life. An original lamp drive system and a more durable new lamp unit help maintain optimal lamp performance for longer-lasting brightness than predecessor models. 2 This has resulted in a 6,000-hour lamp replacement cycle. 1 This value is calculated by continuously turning the lamp on for 2 hours and off for 0.25 hours. The lamp replacement cycle will decrease if the lamp is turned on /off more frequently, or if it is left on for longer intervals. Dust Resistant Design & and an Eco Filter that needs no replacement for 12,000hrs. Extreme care has been taken in designing the dust-resistant structure inside the PT. The lens section, where dust enters, has been protected and separated from the optical block, which is the heart of the projector. Integrated molding of internal cabinet parts has also been increased to further improve sealing performance. The intake and exhaust airflow paths are straight, and the intake airflow path is provided with a new Eco Filter unit to guard the optical components from dust. This dust-resistant design keeps the air inside the projector clean for long periods of time and minimizes brightness degradation. The Eco Filters long replacement cycle1 of 12,000 hours reduces the hassle of maintenance. And, as an environmental consideration, the filter can be washed with water and reused. 1 The usage environment affects the duration of the filter. 2 When washing with water, please follow the procedures listed in the operating instructions. Also, we recommend replacing the filter with a new one after it has been washed and reused twice. If the filter is not sufficiently clean after washing, replace it with a new one. Inorganic Materials Maintain Image Quality Longer. Series projectors optical block maintains a high level of performance over time, due to the use of inorganic materials in the LCD panels and polarizers, thus achieving a replacement cycle of 12,000 hours. It also makes them the logical choice for a truly dependable LCD projector system. Superb & Ecological Performance. Detail Clarity Processor 3 Brings Depth & Clarity To Details. The frequency of the video signal is analyzed for each scene, and distribution data is extracted for the ultra high, high, medium and low-range frequencies. This unique Panasonic image correction circuit optimally enhances each area of the screen. High-precision detection is applied from 2-dimensional horizontal/vertical data to produce more natural, lifelike images with high definition. Daylight View Premium for better Colour Perception. This function corrects the image quality to project sharp, clear images even in brightly lit rooms. A luminance sensor measures the ambient brightness, and a real-time adjustment function optimizes sharpness and brightness according to the surroundings. This adjustment function also works together with the Detail Clarity Processor 3 to enhance the realism and vividness of projected images. This makes images easier to view and offers high contrast. Daylight View Premium for Better Color Perception. There is no actual change in the rated brightness or contrast ratio. A number of functions are provided to reduce power consumption. They adjust the brightness according to ambient light conditions, and reduce the lamp power when there is no signal input or the projector is in AV Mute mode. You can easily set the Eco Management functions according to operating conditions by using the ECO button on the remote control. Installation & Operation Flexibility. 2x Zoom Lens & Horizontal/Vertical Lens Shift. The 2x zoom lens and horizontal/vertical lens shift let you accommodate a wide range of room sizes and shapes. When lights or ventilation holes are located in the ceiling mounting site, you can simply relocate the projector to avoid them. And when replacing existing projectors, this can reduce costs by permitting the use of existing mounting positions and cablings. NOTE: This illustration shows the projection distances of the PT-FW430. Abundant Connection terminals, Including HDMI. Interfaces include HDMI and DVI-I inputs. The serial terminal (RS-232C) has an Emulate function that lets you continue using existing control systems when replacing previous Panasonic models. It is also possible to output audio during Standby mode. This is convenient when connecting an external audio system through the projector. Audio monitoring requires external speakers and an audio amplifier. Easy Remote Monitoring & Control Over LAN. Panasonics original freeware, Multi Projector Monitoring and Control Software Ver. 2.5, allows the user to control and monitor multiple projectors at the same time over a LAN. This software also adds a new function that allows still images and text messages to be simultaneously distributed to multiple projectors. And the PT-FW430 Series models are compatible with PJLink (class 1) to enable integrated control of systems that contain different brands of PJLink-compatible projectors. Easy Wireless Projection From Multiple PC’s (Optional). The optional Wireless Module ET-WM200 allows the PT. Series to provide wireless projection of the same images that are displayed on the PC screen. There is no need to connect the PC with a VGA cable, so you get smooth video presentations with any system layout you want and it is also possible to transmit audio. Settings for wireless connection can be made quickly and easily using Wireless Manager ME 5.5 software and you can also simultaneously project the images from multiple PCs up to 16 PCs using the Multi- Live mode. The wireless LAN security is also newly-compatible with the EAP (Extensible Authentication Protocol) (except for EAP-LEAP). NOTE: Network functions such as Live mode and Multi-Live mode can also be used with a wired LAN. 1024 x 768 Pixels. 100 to 240 V AC. 50 to 60 Hz. Panasonic PT-FX400EA Projector Power cord with security lock (x 1) Wireless remote control unit (x 1) Batteries for remote control (AA/R6/LR6 type x 2) Software CD-ROM Logo Transfer Software, Multi Projector Monitoring and Control Software Ver. 2.5, Wireless Manager ME 5.5 (x 1). 0 to 40 °C. 20 to 80 %. Noise Level (full operating mode). (Normal): 33dB (Economical): 29 dB. Noise Level – High/Normal/Bright Mode. Noise Level – Low/Eco Mode. 100 – 240 V AC, 3.9 – 1.4 A, 50/60 Hz. 330 W 0.3 W at 100 – 120 V AC, 0.4 W at 220 – 240 V AC when standby mode set to eco1, 9 W when standby mode set to normal, 20 W when standby mode set to normal and audio monitor out. 18.9 mm (0.74 inches) diagonal (16:10 aspect ratio). 20.3 mm (0.8 inches) diagonal (4:3 aspect ratio). Transparent LCD panel (× 3, R/G/B). 1,024,000 (1,280 × 800) × 3, total of 3,072,000 pixels. 786,432 (1,024 × 768) × 3, total of 2,359,296 pixels. Manual 2× zoom (throw ratio: 1.34 – 2.68:1), manual focus F 1.7 – 2.6, f 21.6 – 43.0 mm. Manual 2× zoom (throw ratio: 1.48 – 2.96:1), manual focus F 1.7 – 2.6, f 24.0 – 47.2 mm. 250 W UHM lamp The lamp replacement cycle is 6,000 hours. 0.84 – 7.62 m (33 – 300 inches), 16:10 aspect ratio. 0.84 – 7.62 m (33 – 300 inches), 4:3 aspect ratio. 3,500 lm (lamp mode: normal). 4,000 lm (lamp mode: normal). 6000:1 (full on/full off). 1,280 × 800 pixels Input signals that exceed this resolution will be converted to 1,280 × 800 pixels. 1,024 × 768 pixels Input signals that exceed this resolution will be converted to 1,024 × 768 pixels. FH: 27.0 kHz – 68.7 kHz; fV: 24.0 Hz – 85.0 Hz; dot clock: 25.2 MHz – 148.5 MHz. 6 kHz – 91.1 kHz; fV: 24.0 Hz – 85.1 Hz; dot clock: 162 MHz or lower. FH: 15.75 kHz; fV: 60 Hz (480i [525i]) fH: 31.50 kHz; fV: 60 Hz (480p [525p]) fH: 15.63 kHz; fV: 50 Hz (576i [625i]) fH: 31.25 kHz; fV: 50 Hz (576p [625p]) fH: 37.50 kHz; fV: 50 Hz (720 /50p) fH: 45.00 kHz; fV: 60 Hz (720 /60p). FH: 33.75 kHz; fV: 60 Hz (1080 /60i) fH: 28.13 kHz; fV: 50 Hz (1080 /50i) fH: 27.00 kHz; fV: 24 Hz (1080 /24p) fH: 33.75 kHz; fV: 30 Hz (1080 /30p) fH: 67.50 kHz; fV: 60 Hz (1080 /60p) fH: 56.25 kHz, fV: 50 Hz (1080 /50p). FH: 15.75 kHz; fV: 60 Hz (NTSC/NTSC4.43/PAL-M/PAL60), fH: 15.63 kHz; fV: 50 Hz (PAL/PAL-N/SECAM). ±51% from center of screen (manual). ±50% from center of screen (manual). 24% from center of screen (manual). ±27% from center of screen (manual). Output power: 5.0 W (monaural). HDMI 19-pin × 1 (Deep Color, compatible with HDCP) 480p, 576p, 720/60p, 720/50p, 1080/60i, 1080/50i, 1080/24p, 1080/60p, 1080/50p, VGA (640 × 480) – WSXGA+ (1,680 × 1,050), compatible with non-interlaced signals only; dot clock: 25.2 – 146.25 MHz; Audio signal: linear PCM (sampling frequencies: 48 kHz, 44.1 kHz, 32 kHz). DVI-I 29-pin × 1 Digital: (DVI 1.0 compliant, compatible with HDCP, compatible with single link only) 480p, 576p, 720/60p, 720/50p, 1080/60i, 1080/50i, 1080/24p, 1080/60p, 1080/50p, VGA (640 × 480) – WSXGA+ (1,680 × 1,050), compatible with non-interlaced signals only; dot clock: 25.2 – 146.25 MHz; Analog: RGB/YPBPR (YCBCR). D-sub HD 15-pin (female) × 1 (RGB/YPBPR × 1). RCA pin × 1 (composite video). Mini DIN 4-pin × 1 (S-Video). M3 × 1 (L, R × 1), 0.5 Vrms. RCA pin × 2 (L, R × 1), 0.5 Vrms. M3 × 1 (L, R × 1) (monitor out: 0 – 2.0 Vrms, variable). D-sub 9-pin (female) × 1 for external control (RS-232C compliant). RJ-45 × 1 (for network connection, 10Base-T/100Base-TX, compliant with PJLink). Connector for optional wireless module ET-WM200 × 1. Dimensions (W × H × D). 430 × 125.54 × 323 mm (16 – 15/16 × 4 – 15/16 4 × 12-23/32) (Protruding parts not included). Approximately 6.0 kg 13.2 lbs. Operating temperature: 0°C – 40°C (32°F – 104°F)5; operating humidity: 20% – 80% (no condensation). Power cord, wireless remote control unit, batteries (AA type for North America, R6/LR6 type for Europe and Asia) x 2, software CD-ROM Logo Transfer Software, Multi Projector Monitoring & Control Software Ver. 2.5, Wireless Manager ME 5.5. 1 When the standby mode is set to eco, network functions such as power on over the LAN will not operate. Also, only certain commands can be received for external control using the serial terminal. 2 This value is calculated by continuously turning the lamp on for 2 hours and off for 0.25 hours. The lamp replacement cycle will decrease if the lamp is turned on/off more frequently, or if it is left on for longer intervals. 3 Measurement, measuring conditions and method of notation all comply with ISO 21118 international standards. 4 With legs at shortest position. 5 The operating temperature range is 0°C to 35°C (32°F to 95°F) when used in High- Altitude mode 1,400 m to 2,700 m (4,593 ft to 8,858 ft). The item “Panasonic PT-FX400EA Full HD Ready 4000 ANSI Lumens XGA Tri-LCD HDMI Projector” is in sale since Tuesday, April 10, 2018. This item is in the category “Sound & Vision\DVD, Blu-ray & Home Cinema\Home Cinema Projectors”. The seller is “jeremiahweed” and is located in London. This item can be shipped worldwide.
- 3D Capability: 3D-ready
- Resolution: MAX 1080p